Desk Dock 
Travel Dock 
Carbon Dock 
Aurora Dock 
Car Vent Clip 
Mag Grip Ring 
Wall Mount 
Folding Tripod The best motorcycle phone mount is decided by four questions, in this order: where on the bike it attaches, whether it does anything about vibration, whether it needs to power the phone, and what happens when it rains. Get the first one wrong and nothing else matters; get the second one wrong and you may end up with a phone whose camera no longer focuses.
We sell motorcycle mounts, and we have not run vibration, immersion or drop tests on them. This is a buyer’s checklist that tells you what to check on each type, with our own products as worked examples and their unverified specs left unverified.
1. Where it attaches
| Mount point | Best for | Needs | Watch out for |
|---|---|---|---|
| Handlebar clamp | Most bikes, quick fit | A round bar section free of cables | Bar diameter mismatch; crowding the controls |
| Mirror stem | Bikes with no free bar space | The mirror fixing bolt and hardware | Phone sits high and off-center; check the tab opening |
| Fork stem (top of the triple clamp) | Sport and naked bikes, cleanest look | A hollow steering stem you can measure | Assembly; the expansion base must match the stem opening and depth |
| Tank (magnetic) | Cruisers, occasional use | A steel tank surface the magnet actually grabs | Painted, curved or aluminum tanks; no retention guarantee while riding |
Before anything else, sit on the bike and look at where a phone could physically live without blocking a gauge, a mirror or your hands.
Handlebar mounts
The Black Motorcycle Phone Holder with Damping Support is the plain-bar option: a broad cradle with a ribbed inner pad, hooked lower ends, a red side latch and a circular handlebar clamp. Its manufacturer (model PB11 PLUS-AD) describes a damping support between the cradle and the mounting joint; that claim is the supplier’s and has not been independently verified. Check the bar diameter and your phone with its case before ordering.
Mirror mounts
The Black Motorcycle Phone Case Holder with Mirror Tab attaches through a silver-colored tab with an oval opening at the mirror fixing point. It is an enclosed case with a clear front window rather than an open cradle, which changes two things: your phone is covered, and you should check whether the touchscreen responds through the window, which the listing marks as unverified.
Fork stem mounts
The Kewig M28-C6 Fork Stem Phone Mount Kit puts the phone dead center above the triple clamp. It ships as three parts (rear-facing cradle, double-socket arm, expansion base) and needs assembly. Measure the hollow stem opening and its depth first; that is the whole fit question for this type.
Tank mounts
The Black Tank Phone Clamp with Round Magnetic Base sits on a fuel tank by magnet. That only works on a surface a magnet will grab, and the listing is explicit that holding force is unverified and phone retention while riding is not promised. Treat it as a parked-and-slow-speed convenience, not a highway mount.
2. Vibration
This is the question people underrate. Phone cameras with optical image stabilization use tiny moving parts; sustained high-frequency vibration, the kind a single-cylinder or twin puts through the bars, can damage them. Apple and other manufacturers have published warnings about this. What that means for choosing a mount:
- Prefer a mount with a damping element between the bike and the cradle if you ride a bike that buzzes through the bars. Our damping-support model is the only one in this list that describes one, and again the effect is not independently measured.
- A fork-stem mount moves the phone off the bars entirely, which changes what vibration reaches it, but it isn’t a damper.
- If your bike is smooth or your phone is an older one without OIS, this matters less.
No mount here claims to protect a camera. If that protection is a must, look for products sold specifically as vibration dampeners and expect to pay more.
3. Power
A charging mount solves the dead-phone-at-the-end-of-the-ride problem and adds wiring you have to route and fuse correctly.
- The Black X-Arm Motorcycle Phone Mount with Charger is an open X-style cradle (four arms, black end grips) with an attached coiled lead. The supplier describes USB charging; the exact connector, input and output must be confirmed for your bike, and the listing does not verify charging speed, weather resistance or vibration reduction.
- The Black Hooded Motorcycle Phone Holder with Charger is the enclosed version: a tall hood, clear front, adjustment knob and an attached power lead with a visible connector. Same caveats on electrical specs.
If you don’t want to touch the bike’s wiring, the mirror-tab case and the damping-support cradle above have no charging function and no lead.
4. Weather
An open cradle leaves the phone exposed; an enclosed case covers it. The supplier of the mirror-tab case markets it as a waterproof motorcycle phone holder, but there is no IP rating or independent water-ingress test behind that description, so read it as “covered,” not “submersible.” Sun is the other weather problem: a phone in a clear-front enclosure in direct sun can overheat and throttle, which no case prevents.
Quick answers
What is the best mobile holder for motorcycles? For most riders, a handlebar clamp with some form of damping, sized to the bar. Choose mirror or fork-stem mounting when the bar has no free space.
Where is the best place to mount a phone on a motorcycle? Where you can read it with a glance without moving your head far from the road and without blocking gauges or mirrors. Fork stem is the most central; handlebar is the most common; mirror stems sit highest.
Is Quad Lock better than Rokform? We don’t sell either and haven’t tested them, so we won’t rank them. Both use proprietary case-and-mount systems; the mounts on this page use universal cradles or a magnetic base instead, which is the real trade-off: universal fit versus a locked-in ecosystem.
Checklist before you order
- Decide the mount point by looking at the bike, not the product photos.
- Measure: bar diameter, mirror bolt size, or stem opening and depth.
- Decide whether vibration damping matters for your bike and your phone.
- If you want charging, plan the wiring and confirm the connector and output first.
- Check the phone with its case against the cradle or enclosure.
- Set it up parked and give it a hard shake before the first ride.
Everything above is $19.99 at the time of writing. If you tell us your bike model and phone, we’ll say which of these to rule out.
Editor’s note: product facts are taken from each listing on this site and its supplier information. We have not tested vibration, water resistance, charging output or retention while riding. Drafted with AI assistance and reviewed by the Holderphone team.