Blue Four-Position Folding Desk Stand $12.99 
Cream Round-Base Folding Phone Stand 
Dashboard Edge Clip Phone Holder 
Dual-Cradle CD-Slot Phone Mount 
Red-Pad Compact Vent Phone Clip 
Music-Note Character Gravity Vent Holder 
Black Six-Pad Handlebar Phone Cradle 
Oval-Opening Textured Vent Phone Cradle FROM THE WORKSHOP
Guides & Notes
Practical answers about phone holders, stands and mounts: how to choose, where each type fails, and what the listings actually verify. No fluff, no invented numbers.
Arm Phone Holder: A Pink Pull-On Sleeve With a Side-Zip Pocket
Our arm phone holder is a pastel-pink pull-on sleeve with a top-opening phone pocket, a crossover pocket lip and a side-zip compartment. Size, strap and box contents.
Auto Tracking Phone Holder: A Desktop Face-Tracking Holder
Our auto tracking phone holder is a desktop face-tracking holder with a wide clamp, support neck, sensor and control area and slotted base. Checks and box contents.
Backpack Phone Holder: A Shark Clip for Your Shoulder Strap
Our backpack phone holder has a wide toothed shark clip, a short hinged arm with a side thumbscrew and a two-edge phone cradle. Strap checks and setup steps.
Bean Bag Phone Holder With a Raised Front Ledge
Our bean bag phone holder has a triangular fabric-covered body, curved pale stripes and a raised front ledge. Its features, setup order and what is in the box.
Bow Phone Mount: A Black Mount for Recording Archery
Our bow phone mount has curved phone jaws, a ribbed center, an angled rear bracket and a side knob, for recording archery. Pre-use checks and box contents.
Camera Phone Holder: Hinged Magnetic Mount for a Pocket Camera
Our Rose Pink Hinged Magnetic Phone Holder for Pocket Camera has a padded wrap clamp, release clasp and 100 g weight. Included parts, fit checks and FAQ.
Cold Shoe Phone Mount With a Folding Arm and Magnetic Plate
Our cold shoe phone mount has a folding arm with a round magnetic phone plate, a cold-shoe foot and a 1/4-inch threaded base. Its parts, setup and what fits.
Controller Phone Mount With a Two-Jaw Clip and Wire Kickstand
Our controller phone mount combines a two-jaw phone clip, a curved controller cradle and a silver wire kickstand. What to check and what is in the box.
Cute Phone Stand: A Pink Smiling Acrylic Stand for Your Desk
Our cute phone stand has a pink twin-lobed smiling backplate, two front retaining ledges and a green hinged support on a green base. Fit check and box contents.
Dual Phone Holder With Two Clamps and a Ring Light
Our dual phone holder has a round base, an adjustable pole, a crossbar with two phone clamps and a ring light above both phones. Setup and box contents.
Fence Phone Mount: A Blue Court Mount for Tennis Nets and Fences
Our fence phone mount is a blue court mount with a tall central hanging slot, two open ledges and triangular supports. Fit check and box contents.
Flexible Phone Tripod: Black Segmented Legs and Magnetic Ring
Our black flexible phone tripod has three segmented legs, a circular magnetic phone ring and a tilting head joint. Listed parts, setup steps and box note.
Floor Phone Stand With Caster Wheels and a Telescoping Pole
Our floor phone stand has a wheeled base, telescoping pole, three-section arm and phone/tablet clamp. Its parts, how to set it up and what to check first.
MagSafe Tripod: Telescopic Pole, Folding Legs and Magnetic Head
Our telescopic magnetic phone tripod combines a circular magnetic head, a telescopic center pole and three folding legs with braces. Setup steps and FAQ.
Monitor Phone Holder: Gray Folding Screen Side Phone Holder
Our Gray Folding Screen Side Phone Holder uses two gray clipped-corner folding bars at a silver-colored pivot to position a phone beside a laptop screen.
Mountain Bike Phone Mount: Black and Yellow Stem Phone Mount
Our Black and Yellow Mountain Bike Stem Phone Mount uses a tall ribbed black cradle with raised corner supports and yellow contact inserts above the bicycle stem.
Music Stand Phone Holder: Screw Clamp Below, Cradle Above
Our music stand phone holder pairs a horizontal phone cradle with a lower screw clamp. Its parts, what to check on your stand and how to set it up.
Neck Phone Holder: A Pink Holder With Flexible Twin Arms
Our neck phone holder is a pink holder with long flexible twin arms, a black cushioned neck loop and a phone clamp on a short stalk. Setup, fit check and box contents.
Overhead Phone Mount With a Folding Arm and Edge Clamp
Our overhead phone mount has a folding articulated arm, a side-grip cradle and a screw-style edge clamp. Its parts, setup order and what to check first.
Phone and Watch Charging Stand: Pastel Pink Folding 3-in-1 Stand
Our Pastel Pink Folding Three-in-One Phone and Watch Charging Stand has a hinged phone panel, magnetic charging area, lower watch puck, earbud pad and 120 g weight.
Phone Holder Arm With Elbow Joints and a C Clamp
Our phone holder arm is a black two-section arm with round elbow joints and a screw-down table edge C clamp. Its parts, setup order and what is in the box.
Pillow Phone Holder: A Plush Horse That Props Up Your Phone
Our pillow phone holder is a brown horse-shaped plush phone rest. How it props up a phone, what comes with it and what to check first.
Pink Phone Stand: A Curved Base, One Hinge, Two Padded Lips
Our pink phone stand has a continuous curved back and base, one top hinge and two padded cradle lips. What the listing says and how to check fit.
Pink Power Bank With a Kickstand and Charging Lanyard
Our pink power bank is a pastel pink magnetic power-bank phone stand with a display panel, rear kickstand and charging lanyard. What is in the box and what fits.
Rotating Phone Holder: A Folding Stand on a Swivel Mount
Our rotating phone holder is a yellow folding desk stand on a raised swivel mount. The parts our listing names, what is in the box and what to check.
Running Belt for Phone: A Pink Waist Belt With Mesh Wings
Our running belt for phone is a cherry-pink waist belt with a main zipper, mesh wings and a side-release buckle. What the listing says and what is in the box.
Selfie Stick Tripod: Pink Compact Stick and Remote
Our pink compact selfie stick tripod has a gold-tone collar, telescoping shaft, hinged phone clamp, three-legged base and inset listed Bluetooth remote.
Silicone Phone Holder: A Mint Stand With Rear Suction Cups
Our silicone phone holder is a mint flexible stand with a ribbed surface, rear suction cups and a split front lip. Tabletop fold, fit check and box contents.
Spotting Scope Phone Mount: Adjustable Eyepiece Clamp
Our spotting scope phone mount has an angular eyepiece clamp, a slotted alignment rail and a padded phone cradle. Listed uses, fit and alignment steps.
Water Bottle Phone Holder: A Black Bottle With a Hinged Ring
Our water bottle phone holder is a black bottle with a ribbed lid, a small cap and a hinged ring described as a magnetic phone holder. Use steps and box contents.
Wall Phone Holder: A Strawberry Pocket for Your Phone
Our wall phone holder is a blue strawberry-shaped pocket that holds a phone in portrait orientation. What it is, what it does not do and what to check first.
ATV Phone Mount: Where on the Handlebar to Put It, and What a UTV Needs
Our listing says this ATV phone mount clamps to the handlebar. Four checks to pick the spot on the bar, what a UTV needs, and how to set it up while parked.
Bamboo Phone Stand: Two Boards, One Seated Teddy
Our bamboo phone stand is a seated teddy made of two interlocking boards: a backplate and a phone shelf. What the listing says and what to check.
Boat Phone Holder: Clamp It to a Round Rail, Not a Car Vent
Our listing says this boat phone holder has a split clamp for a round rail. How to check your rail and phone, and set it up before you leave the dock.
CD Slot Phone Mount: Will It Damage the CD Player, and How to Fit One
A CD slot phone mount sits in the slot on a mounting tongue. What one driver asked about damage, what an owner replied, and how to fit a mount without forcing it.
Phone Holder for a Car Dashboard: Where to Put It and What to Do Without a Smooth Spot
Choose the spot before the phone holder: a smooth area you can reach that keeps the road and controls clear. What to do if your car dashboard has no such spot.
E-Bike Phone Holder: Make Sure the Side Clamp Reaches Past Your Phone's Thickest Point
Our listing says to check phone and case dimensions before ordering this e-bike phone holder. How to check jaw reach on a thick phone, the bar collar, and setup.
Folding Phone Stand: A Flower Vase That Holds Your Phone
Our folding phone stand is a cream vase-shaped photo frame with two clear cradle hooks and a red hinged arm. What the listing says and what to check.
Fork Stem Phone Mount: Look Inside Your Stem First
Our listing says this fork stem phone mount fits the stem, not the bar. What to check in your stem opening, depth, phone and controls before you order.
Gooseneck Phone Holder: Pick the Edge Before You Clamp
Our gooseneck phone holder clamps across a desk or shelf edge and is not freestanding. How to pick the edge, check your phone and set up the arm.
Helmet Phone Mount: Check How the Base Meets Your Helmet Before You Stick It
Our listing says this helmet phone mount sticks on with an adhesive pad. How to dry-fit the rounded base on your helmet, check your phone and set it up.
Headrest Phone Holder: Check Your Headrest Posts First, Then Set It Up
Our listing says this headrest phone holder fits around a suitable exposed headrest post. How to check your headrest and set one up for back seat viewing.
Kayak Phone Mount: A Deck Holder for Your Phone and Your Drink
Our listing says this kayak phone mount holds a bottle and a phone and ties down at four points. How to check your deck and set it up before you launch.
Kitchen Phone Holder: Measure Your Cabinet Edge First
Our kitchen phone holder hooks over a cabinet edge and is listed for 16 to 19 mm boards. How to measure, pick a spot away from the stove and hang it up.
Laptop Phone Holder: Beside the Screen, Folds Flat
Our laptop phone holder is designed to sit beside your laptop screen, folds flat and comes with two metal plates. What the listing says and what is in the box.
Motorcycle Handlebar Phone Mount: Find the Spot Before You Buy
Before you order a motorcycle handlebar phone mount, find a free spot on the bar, check your phone and case and keep the controls clear. Then set it up parked.
Motorcycle Phone Mount with Charger: What to Check Before You Wire It In
Our listing says this motorcycle phone mount with charger has a hooded enclosure and an attached power lead. What to check before you wire it in.
Motorcycle Tank Phone Mount: Check the Tank Takes a Magnet
Our listing says this motorcycle tank phone mount uses a round magnetic base. Four checks for your tank, phone and controls, and how to set it up stationary.
Rear View Mirror Phone Holder: Will It Fit Your Mirror and Sit Steady?
A rear view mirror phone holder hangs from the mirror's edge on a clip. What to check on your mirror before buying, what drivers say goes wrong, and how to fit one.
Scooter Phone Holder: Check the Bar and Your Phone Before You Clamp It On
Our listing says this scooter phone holder clamps to a suitable round bar section. How to check your handlebar and your phone in its case, and how to set it up.
Snowmobile Phone Mount: When the Handlebars Are Full, Try the Tank
Our listing says this snowmobile phone mount is a tank saddle bag with a clear-window phone pouch. What to check on your tank, gas cap, phone and controls.
Steering Wheel Phone Holder: Why It Is for a Parked Car and How to Use One
A steering wheel phone holder straps to the wheel and is for a parked car. What people ask about it, what to check before buying, and what to use while driving.
Sun Visor Phone Holder: What to Check on Your Visor and How to Set One Up
A sun visor phone holder clips to the visor and brings the phone down on an arm. What to check on your visor before buying, who it suits, and how to set one up.
Wheelchair Phone Mount: Find the Right Tube First
Our listing says this wheelchair phone mount clips to a frame tube. How to find a spot clear of controls, folding parts and transfer areas, and set it up.
Wireless Car Charger Mount: What to Check Before You Buy and Why the Phone Gets Hot
A wireless car charger mount holds the phone and charges it through a pad. What to check before buying, what drivers say about heat, and how to set one up.
Wooden Phone Stand: A Little Art, Still a Phone Stand
Our wooden phone stand is a lying pig with an oval grooved base and fixed support. What the listing says, and what to check before you order.
How to Attach a Phone Charm: Charm Hole, No Hole, String or Clasp
A phone charm attaches to the case. Thread a string loop through the charm hole, clip a clasp to a ring or tab, or add an attachment point if the case has no hole.
How to Attach a Phone Lanyard: Tab, Case Eyelet, Anchor or Magnetic Ring
A phone lanyard attaches by a tab under the case, a case eyelet, an anchor bar or a magnetic ring. Check your case first, then pick the attachment that fits it.
Magnetic Phone Wallet: Getting Cards Out, Keeping Them In, What to Check
Before you buy a magnetic phone wallet, check your phone or case for a magnetic ring, how the cards come out, and how many cards you carry every day.
MagSafe Car Mount: Why Your Phone Shifts and How to Set One Up
When a phone shifts on a MagSafe car mount, check the case magnet, anything magnetic in between, and how the base is fixed. Then set the mount up in order.
Magnetic Phone Grip: Why It Comes Off and What to Check First
Before you buy a magnetic phone grip, check your case for a magnetic ring, check the camera bump, and think about steel surfaces. Plan to take it off to charge.
Phone Kickstand Types: Magnetic, Adhesive and What to Check Before You Buy
A phone kickstand attaches by magnets or by adhesive. Start from the back of your phone or case, then check which way it props the phone and how it is finished.
Phone Strap Holder: Adhesive or Magnetic, and How to Get the Fit Right
A phone strap holder sticks on or snaps on by magnet. Check the back of your phone, pick a strap that adjusts to your hand, and place it where your fingers rest.
Phone Wrist Strap or Crossbody Strap: Which to Carry and How to Fit It
A phone wrist strap keeps the phone in your hand on a short loop. A crossbody strap frees both hands. Choose by use, then check how the loop adjusts and connects.
Will a Vent Phone Holder Damage Your Car Vents? Gravity, Clip and Hook Types
A vent phone holder can damage a vent, and it depends mostly on how you handle it. What drivers report, how gravity, clip and hook holders grip, and how to fit one.
Air Vent Phone Mount: Do They Work, Which Vents Fit, and How to Attach One
A vent phone mount holds on the vent slat, not the dash. Which vent shapes work, why some clips slip, how to attach one so it stays, and when to pick magnetic or clamp.
Secure Bike Phone Holder Setup: Why Phones Fly Off and What Keeps Them On
Phones leave bike mounts for four reasons: an open cradle, a clamp on the wrong bar size, a case that changes the fit, and no tether. A secure bike phone holder setup, in order of what matters most.
Cup Holder Phone Mount: How It Grips, How to Install It, and When It Beats the Dash
A cup holder phone mount expands into the cup recess and lifts the phone on an arm. How the base grips, how to install it without rattles, what it blocks, and when it is the right choice over a dash or vent mount.
Guitar Phone Holder: How to Attach a Phone to a Guitar for Practice Videos
A guitar phone holder clips to the headstock so a chord chart, tab or lesson stays in view, or films your hands. How to attach one, what fits which headstocks, and the alternatives on a stand or mic stand.
Gym Phone Holder: Where to Keep Your Phone Between Sets, Magnets vs Straps
A gym phone holder has to work on someone else's equipment: steel racks, plastic consoles, a bench that moves. Where to keep the phone between sets, what a double-sided magnet needs, and when a strap or a belt is the better answer.
Golf Cart Phone Holder: Magnetic vs Clamp, Where It Mounts, and What Vibration Does
A golf cart phone holder has to survive an open cab, a rough fairway path and a phone you glance at between shots. Magnetic or clamp, where on the cart to mount it, and how to keep the phone on over bumps.
Is a Phone Mount Legal in Your Car? Windshield, Dash and Vent Rules Explained
Phone mounts are legal in every US state; what several states regulate is where a windshield mount may sit and how much of the glass it may cover. What the rules cover, where a dash or vent mount avoids the question, and how to check your state.
Phone Holder for Mic Stand: Gooseneck Clamps, Angles, and What to Use Instead
A phone holder for mic stand use clamps to the pole and puts lyrics, a lesson or a camera at eye level. How the clamp fits a stand, how to set the gooseneck so it stops drooping, and the alternatives when you do not own a stand.
Phone Mount for Truck: Reach, Heavy-Duty Bases and Cab Vibration
A phone mount for truck cabs has to reach a deep dash, hold on a larger suction base and survive diesel vibration. Which mount types fit a truck, what heavy-duty actually means, and where to place one.
Phone Stand for Recording: Height, Angle and a DIY Version That Holds
A phone stand for recording needs eye-level height, a stable base and a hands-free angle. Which stand types work for video, how to set the height, and a DIY stand that survives a tap.
Ring Light Phone Holder: Center Clamps, Gooseneck Arms and Threaded Studs Explained
A ring light and phone holder combination puts the camera in the middle of the light or on an arm beside it. What the center clamp, the gooseneck arm and the threaded stud each do, which one your light accepts, and what to check before you order a replacement holder.
Stroller Phone Holder: Cup-and-Phone Clamps, Where They Fit, and What Bounces
A stroller phone holder has to clamp a round handlebar, keep the phone upright over curbs and stay clear of the fold. What a cup-and-phone clamp does, where on the frame it fits, and what to check before you order.
Treadmill Phone Holder: Magnetic Disc, Console Clamp or Shelf, and Where to Put It
A phone holder for treadmill use has to hold through footfall vibration and stay readable at walking height. Magnetic disc, console clamp or the console shelf: what each needs, where it mounts, and what to check on your machine first.
Wrist Phone Holder: Do Phone Wristlets Work, and When a Wrist Mount Beats an Armband
A wrist phone holder keeps the screen in view without a hand on the phone. What a wrist mount does that an armband and a wristlet strap do not, who it suits, and how to fit one so it stays put.
Airplane Phone Holder: Four Ways to Watch on a Plane and When Each Fails
An airplane phone holder clips to the tray table, hangs from the seat back, sticks to the window or stands on the tray. What each needs, what the person in front can do to it, and what to stow for takeoff.
DIY Car Phone Holder and Airplane Phone Holder Hacks: What's Safe, What Isn't
DIY car phone holder ideas that are safe when parked and risky in motion, airplane phone holder hacks that survive a reclining seat, and when a real mount is the honest answer.
DIY Phone Holder and Tripod: What Works, What Wobbles, and When to Buy One
DIY phone holder and tripod ideas that actually hold, why most homemade tripods shake, and the point where a $19.99 clamp or mini tripod beats another rubber band.
Foldable Phone Stand: Why Thin Stands Tip, and How to Pick One That Doesn't
A foldable phone stand trades base size for pocket size. The one test that predicts stability, what hinges do to wobble, and which folding shape suits a desk, a bag or a bedside.
Phone Charging Stand: Magnetic, Cabled or 3-in-1? What the Watt Numbers Mean
A phone charging stand is three decisions: magnetic or cabled, phone-only or phone-plus-watch, and what power supply it really needs. How to read output ratings and what listings leave out.
Phone Chest Mount vs Neck, Helmet and Backpack Mounts: Where to Wear the Camera
A phone chest mount gives the steadiest first-person view, but neck, helmet and backpack-strap mounts each solve a different problem. Compare by height, shake and how fast you can take it off.
Phone Grip Types Compared: Expandable, Ring, Strap or Magnetic
A phone grip is a thickness, flat-lying and charging trade-off before it is a brand choice. Expandable grips, rings, straps and magnetic grips compared by what each blocks and when each wins.
Phone Ring Holder: Where to Stick It, Magnetic or Adhesive, and What It Blocks
A phone ring holder is a grip, a kickstand and sometimes a car-mount plate. Where to place it, why magnetic rings changed the trade-offs, and what a ring does to wireless charging.
Best Bike Phone Mount: Handlebar, Stem or Case? A Fit-First Guide
The best bike phone mount depends on your bar, your bike and the weather. Compare handlebar clamps, stem mounts and zip cases, what each needs, and what to measure first.
Best Car Phone Holder: How to Choose by Mount Type
The best car phone holder depends on where it attaches. Compare dash, windshield, vent, CD slot, cup holder, headrest and visor mounts, what each needs, and where each fails.
Best iPhone Tripod: Pick the Type Before the Model
The best iPhone tripod depends on the job: desk clips, magnetic minis, telescopic poles, floor stands or just a clamp for a tripod you own. What each type needs and where it fails.
Best Motorcycle Phone Mount: Choose by Mount Point, Vibration, Power and Weather
Pick a motorcycle phone mount by four things: mount point (bar, mirror, tank, fork stem), vibration damping, power, and weather. A checklist with real products.
DIY Phone Stand: 7 Household Ideas That Actually Hold
Seven DIY phone stand ideas ranked by how well they hold, why some tip or slide, and the point where a $20 stand beats another binder clip.
Phone Holder for Bed: Gooseneck, Pillow or Overhead? Pick by How You Lie
A phone holder for bed has to match how you lie: gooseneck clamps on your back, pillow stands on your side, overhead arms for filming. What each needs and how to keep it off your face.
Phone Holder for Running: Armband, Belt, Wrist or Hand? Compared by Bounce
The best phone holder for running depends on four things: bounce, sweat, how fast you can reach the phone, and whether you need to see the screen. Six carry types compared honestly.
Shower Phone Holder: How to Pick One That Stays Up and Stays Dry
A shower phone holder fails three ways: it falls off tile, it fogs, or the screen won't respond through the window. How each mounting type behaves and what waterproof really means.
Suction Cup Phone Holder: Why It Falls Off and How to Choose One That Won't
A suction cup phone holder holds by vacuum, and vacuum fails on texture, dust, heat and age. Which surfaces work, how to restore grip, and how the three mount types differ.
Magnetic Phone Holder vs Clamp vs Weighted Dock: Which Actually Fits Your Setup
A magnetic phone holder is only as good as the ring behind it. How magnetic, clamp and weighted-cradle holders compare on grip, case compatibility and where each fails, for desk, car, tripod and gym.
Phone Stand Height and Angle: A Practical Ergonomics Guide
How high and at what angle to set a phone stand for video calls, reading, filming, and bedside use — with simple rules you can check without any tools.
How to Stop Your Phone Wobbling on a Desk Stand
Why phone stands wobble — base mass, contact grip, and arm leverage — and how to fix each cause, whether you keep your current stand or replace it.